Install Latest Official TWRP On Redmi Note 7 Pro

Install Official TWRP On Redmi Note 7 Pro

Xiaomi Redmi Note 7 Pro is a very popular and one of the most sold devices from Xiaomi. The device performs very well and offers a smooth experience. But now this device becomes an old device and lots of users want to try some magisk module for better gaming performance or want to try Custom ROMs like Oxygen OS or Corvus OS which gives you a lot better gaming experience and very smooth day to day performance on your Redmi Note 7 Pro device. It is required to unlock bootloader on your Redmi Note 7 Pro and install TWRP Recovery to flash any Custom ROM or any module.

Finally, official TWRP Recovery for Xiaomi Redmi Note 7 Pro has arrived. In this article, I will show you the full method to install the TWRP custom recovery on the Xiaomi Redmi Note 7 pro. To install the Custom Recovery on the phone, first, you have to unlock the bootloader of your phone. Check out our guide here on how to unlock the bootloader of Redmi Note 7 Pro.

What is TWRP-

TWRP stands for TeamWin Recovery Project. It is an open-source and entirely GUI based custom recovery for Android devices. It allows Android users to enjoy fully touch-based UI and flash custom ROMs, MODs, Magisk, SuperSu, etc. TWRP is a door to install different customization modules with ease. It even supports full system backups of the current system state which are impossible without the custom recovery.

Advantages of Custom Recovery-

  • Easy Full-System backups
  • Flash image file on the device.
  • Adds the ability to remove bloatware from the stock ROM.
  • Supports underclock and overclock of the processor.
  • Quickly flash custom ROM, MOD, Framework.
  • Support to quickly flash Xposed and Magisk Framework.
  • Easy installation of Magisk for rooting
  • Ability to wipe cache and data.

Note:-Romify Blog is not responsible for any kind of damage to data or device while performing the unlocking. It will also void the device’s warranty and remove all data on the device. You’re proceeding at your own risk.

Install Official TWRP on Redmi Note 7 Pro-

Before following this guide do take the full backup of your data. Read all the steps very carefully to Install Official TWRP On Redmi Note 7 Pro. Once the TWRP is installed you can install custom ROM on your phone and also ROOT the Redmi note 7 Pro with Magisk Manager. So let’s get started and install TWRP Recovery on Redmi Note 7 Pro.


  1. Make sure your battery is charged above 50%.
  2. Backup your Data on any external media or perform a Nandroid backup.
  3. Download ADB and Fastboot Drivers on the PC/Laptop.
  4. Download latest Xiaomi USB Drivers on the PC
  5. Download and save twrp-3.2.3-violet.img it to the Extracted folder of ADB – Fastboot drivers.
  6. Unlocked Bootloader of Xiaomi Redmi Note 7 Pro.

Steps to install TWRP on Redmi Note 7 Pro-

1. If Redmi Note 7’s Bootloader is unlocked, then you’re good to go with the next steps.

2. Enable the Debugging Mode, and OEM unlock on your device. Both options can be found in the Developer Options.

3. Now, connect your device with PC via USB cable.

4. Extract ADB and Fastboot drivers in a folder on the PC. Then, Open the cmd or PowerShell by pressing Shift key + Right-Clicking in the same folder.

5. Once all the setup is complete, type the following command to reboot the Redmi Note 7 Pro into the fastboot mode (Note: Accept a pop-up asking for the USB debugging permission on your smartphone).

  adb reboot bootloader  

6. After booting into the fastboot mode, type the below-mentioned command to flash the TWRP image you download. (Note: Place the twrp-3.2.3-violet.img file in the ADB and Fastboot extracted the folder.)

  fastboot flash recovery twrp-3.2.3-violet.img  

7. After the successful flashing, reboot the device using the following command:

  fastboot reboot  

8. Done TWRP is installed on your phone. 

9. Now hold Volume Up + Power button to boot your phone in TWRP mode.

10. Once you are on the TWRP, Choose “Wipe” and tap on the “Format Data” Button and Type yes.

11. Now move Patched_fstab-vbmeta-thermal and Disable_Dm-Verity_ForceEncrypt on your phone from pc or sd card.

12. Now in TWRP main menu then choose “Install“.

13. First install and after that

14. Once done, choose “Reboot” then “System“.

Root Redmi Note 7 Pro using Magisk-

Download the latest Magisk zip and move them to the phone’s storage. Now follow steps carefully to root your Redmi note 7 Pro using magisk.

1. Download Magisk.Zip move them to the Phone storage.

2. Type the ADB command to boot into the TWRP recovery successfully:

  adb reboot recovery  
Now hold Volume Up + Power button to boot your phone in TWRP mode.

3. The device will automatically boot into TWRP, now take a NANDroid backup if you need data.

4. Now, Select “Install” from the TWRP and browse for the file. 

5. Tap on it to select it and “Swipe to confirm flash” action.

6. Reboot to System from TWRP Recovery.

7. Magisk Manager application will be present in the app drawer.

8. You can also install the Root Checker app to verify root access.

We hope you’ve successfully install Official TWRP on Xiaomi Redmi Note 7 Pro with and root it with  Magisk. If you have any questions about the guide or facing some problems during the process then leave the comments below, and we will help you to fix it up.

Post a Comment